Thermal probe

NTC10k probes in AISI304 stainless steel diameter 6 mm suitable for Pixsys thermoregulators for sale on this site but also suitable for cheaper thermoregulators such as the famous STC-1000 which, however, supplies the probe in plastic material not certified for immersion in food. These particular probes have a shape and a size that cannot be found on the market, they usually do not exceed 20cm, so with lengths ranging from 20 to 50 cm ready for storage. The sensitive element used in these particular probes is embedded in the tip with heat-conducting paste to avoid a long probe response time. The sensitive element has a maximum working temperature of 150 ° C and an accuracy of +/- 1% at 100 ° C. The corner shape is specially made to avoid the risk of completely inserting the probe beyond the metal, thus having to extract the probe by pulling the cable and possibly damaging it. It also has a handle to easily adjust the insertion depth. Cable length 2mt.

BacBrewing probes should be used where temperatures are within the normal range of use in the home brewer up to 100 ° C as they are not drowned or sealed in particular insulators such as magnesium oxide.

CAUTION

The 100mm size is not angle but linear