Large shovel whirlpool

Shovel to perform a powerful whirlpool in a short time and without effort using a drill or screwdriver on a quantity of must of at least 70 liters. For smaller productions we recommend the use of the small whirlpool Paletta

The 75 cm long shaft is 12 mm diameter in solid AISI304 stainless steel, the 3 pallets are 20/10 thick are 120mm wide in AISI304 stainless steel welded tig to the 120 ° shaft between them with a particular shape that does not disturb the bottom and does not cause splashing during extraction. Thanks to the fact that there are three and not two pallets, everything is balanced, making it easier to keep the blade in the center.

The apex of the pole that is inserted into the drill has a reduction from 12 to 10 mm

Electropolished surface finish mirror, electrodecapata, passivated.

It is supplied standard with a reduction to 10mm at the apex of grip in the spindle.

Once the shovel has been inserted, gradually start the drill, keeping the speed constant with the regulator and when the must has reached the congenial peripheral speed, slowly remove the blade while keeping the speed constant. Thanks to the teardrop shape of the blades, there will be no outgoing splashes, the effort will gradually decrease thus avoiding the unpleasant effect of the "motorboat"!

Shipment abroad is considered voluminous and passes from the basic transport price to the increased transport price

On the Youtube page you can see a MOVIE.