Kit springer per BM20/50 altezza foro 50mm

Impossible to cut the spring

The product is of high quality and looks even better in reality than on pictures. It fits perfectly on my Braumeister 20L+ . It leaves 2.1L of wort in my Braumeister 20L which is better than 4.8L when used without the springer.

The problem with the springer is that you have to cut it yourself. It was impossible to cut, I destroyed my first pliers and when using a larger pliers I injured my hand and could not even make a dent. I found a video on youtube where a blow torch was used. I tried the blow torch approach several times, but the spring could not be cut off, probably due to not enough heat. I decided to make a last try with the torch and this time it broke when cooled down and bent, so I guess it became brittle.

Unfortunately my springer was bent due to my unsuccessful cutting with pliers, so it does not filter particles as good as perfect springer would, and therefore i can not evaluate how good it filters particles.

If it wasn't for the problem cutting the springer, it would probably get a five star rating.

Hello. As you can see from the video and the instructions attached to the product, cutting a springer is very simple, obviously you need a steel cutter. Using a flame is the worst that can be done for the deformation of the coils.

Great product

Tried this for the first time yesterday. Perfect. 1.5 meter drop to mag pump. Recirculated at end of boil for a couple of mins. Wort crystal clear. Then transferred to FV. Best wort I've ever had with Braumeister. Not tried it with just siphon but with mag pump to pump to FV - flawless. Just make sure you order the correct size. 50mm or 60mm to centre of hole from bottom of pot. My 20 litre Braumeister is 50mm version but presume not all the same.